|
|
Post by MoparMarc68 on Jun 16, 2010 4:51:26 GMT -5
Simple here just one picture and a brief description....
Lets see how wild we can make the one picture!
Were's waldo comes to mind! i know alot of work benches that are this way LOL.............
I will keep this open until June 25th and then the voting will begin!
|
|
jerry
Glued Fingers
Posts: 109 
|
Post by jerry on Jun 16, 2010 8:11:24 GMT -5
1967 Chrysler 300 convertible Still need to find a pair of front bucket seats, otherwise I'm ready to begin. Last night I repaired the cowl and radiator support.  Jerry |
|
|
|
Post by radridesbydan on Jun 16, 2010 23:48:40 GMT -5
Started with a Ford T-Bird NASCAR chassis and cut off the top half of the roll cage and scratch build the upper half of the roll cage and dash to fit the 69 Chevelle roof line and cowl. All wired... every sensor, O2, TPS, Mass air flow, temp, rad fan switch, plugs, injectors, oil level, ignition, Tack, throtle cable, battery, fuel pump and fuel lines etc.  |
|
|
|
Post by mastermodeler on Jun 21, 2010 23:11:08 GMT -5
Ok..... Here's mne:  Hosted on FotkiThe car is quite popular with the low-rider contingient. On this one, I have plumbed and wired the engine, as well as intalled the engine dipstick tube and trans dipstick tube....both with removable dipsticks. The air cleaner housing had BOTH snorkels hollowed out to give IT a more realistic appearance. There is a lot more that I've done with this vehicle, BUT........ Alex |
|
|
|
Post by virgil on Jun 23, 2010 13:34:46 GMT -5
I love it!!! This is the first time i have seen anyone do this type of build to make a 57 Panel, and i must say, you are doing a great job of it!!! When you go to post pics from your photo hosting site, you want to right click on the "img" url, and click "copy". Now you can go to the post, at the top of the post page, there are 2 lines of boxes. On the bottom row of boxes, 4th box from the left is a picture icon. Click on that and the ![]() [img/] bars appear on the post page. From here, you click right in the middle of the ][ in the blank space between the bars, and click "paste". Now your pic is on the post. I hope this helps you out. Virgil |
|
|
|
Post by ScaleModelRestoration on Jun 24, 2010 8:16:04 GMT -5
1962 Mercury Montery 2dr hardtop replaced passenger side A-piller and Vent post.  |
|
|
|
Post by olskoolrodder on Jun 26, 2010 0:01:35 GMT -5
Don't know if I'll make the 25th cutoff or not (depends on timezone I suppose),but here's mine. '55 F100,semi-replicating a magazine cover truck (1:1). That's about the stance I'm shooting for BTW   |
|
